Product Data Sheet
MSDS Code G.P.
       

Product

Synthepol P112F
Type

An Unwaxed, Flexible, Orthophthalic Unsaturated Polyester Resin.
Applications
*Automotive Putties
*Marine Bonding Putties
Application Method
*Compounding with fillers  
Features
*Flexible polyester resin *Unwaxed
*Capacity for high filler loadings  *Non thixotropic
*Prepromoted for cure with MEKP  
*Putties have good adhesion and excellent storage stability  
*Can be used to modify physical properties of rigid resins  
Typical Properties
*Appearance in can Yellow / brown liquid
*Viscosity at 25º C (Brookfield RVT Sp 3/100 rpm) 6-7 poise
*Specific gravity 1.14
*Gel time at 25º C with 1% MEKP 10-14 minutes
*Flammability High
*Flashpoint 31º C
*Storage stability 6 months minimum
*Styrene content 31-34%
Directions
 Synthepol P 112 F is intended for use in the manufacture of MEKP cured filler
compounds. Mineral fillers, thixotropic agents and other additives should be tested to
ensure they do not adversely affect storage stability or cure..
Storage
 All Synthepol polyester products should be stored in closed containers away from
any source of ignition and out of direct sunlight at temperatures below 25º C.

All information and products are supplied in good faith, without warranty expressed or implied that they are suitable for any particular purpose, and any statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.We cannot anticipate or control the many different conditions under which our products may be used, and therefore recommend that our clients test and evaluate the products and information to determine theiir suitability for the intended purpose.
Back to resin page
 
Synthepol
A Division Of Chemical Specialties Ltd
116 Princes St. Onehunga. P.O.Box, 29109 Greenwoods Cnr, Auckland, New Zealand.
Phone 0064 9 636 8618. Fax 0064 9 636 8618. E Mail synthepol@chemspec.co.nz