Product Data Sheet
MSDS Code G.P.
       

Product

Synthepol P115W
Type

A General Purpose Waxed Orthophthalic Polyester Laminating Resin
With A Short Gel Time.
Applications
*General. laminating *Bathroomware
*Marine *Water & storage tanks
*Transport *Furniture
Application Method
*Spray up *Hand lay-up
Features
*Gives rapid wet out of reinforcement *Offers a rapid cure for fast mould turn round
*Has excellent sprayability *Promoted
*Has a colour change mechanism *Waxed
*Gives a shorttrim time  *Thixotropic
Typical Properties
*Appearance in can Blue, hazy
*Viscosity at 25º C (Brookfield RVT Sp 3/100 rpm) 4.0-5.0 poise
*Specific gravity 1.11
*Gel time at 25º C with 1% MEKP 13-17 minutes
*Gel time at 15º C with 2% MEKP 15-19 minutes
*Flammability High
*Flashpoint 31º C
*Storage stability 6 months minimum
*Heat distortion temperature (HDT) 67º C
*Barcol 934.1 hardness 45
*Elongation at brea 2.5%
Directions
 Synthepol P 115 W should be catalysed with 1-2% MEKP and mixed thoroughly
prior to application to the glass reinforcement. The ratio of catalyst to resin can be varied
to adjust the gel time and cure. For best results workshop temperatures should be
maintained above 15º C in order to ensure that a satisfactory cure is achieved.
Storage
 All Synthepol polyester products should be stored in closed containers away from
any source of ignition and out of direct sunlight at temperatures below 25º C.

All information and products are supplied in good faith, without warranty expressed or implied that they are suitable for any particular purpose, and any statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.We cannot anticipate or control the many different conditions under which our products may be used, and therefore recommend that our clients test and evaluate the products and information to determine theiir suitability for the intended purpose.
Back to resin page
 
Synthepol
A Division Of Chemical Specialties Ltd
116 Princes St. Onehunga. P.O.Box, 29109 Greenwoods Cnr, Auckland, New Zealand.
Phone 0064 9 636 8618. Fax 0064 9 636 8618. E Mail synthepol@chemspec.co.nz