Product Data Sheet
MSDS Code G.P.
       

Product

Synthepol P420Wh
Type

A Pigmented Unwaxed Orthophthalic Polyester Laminating Resin
Which Gives Excellent Adhesion to Acrylic Sheet.
Applications
*For the reinforcement of thermoformed acrylic sheet used in the production of baths, showers and spa pools.
Application Method
*Spray-up *Hand lay-up
Features
*Gives a rapid wet out of the matrix *Thixotropic
*Has excellent sprayability *Pigmented
*Gives a generous trim time  
*Offers a rapid cure
  
*Promoted  
Typical Properties
*Appearance in can White
*Viscosity at 25º C (Brookfield RVT Sp 3/100 rpm) 4.5-5.5 poise
*Specific gravity 1.11
*Gel time at 25º C with 1% MEKP 18-23 minutes
*Flammability High
*Flashpoint 31º C
*Storage stability 6 months minimum
*Heat distortion temperature(HDT) 67º C
*Barcol 934.1 hardness 45
Directions
 Synthepol P 420 Wh should be catalysed with 1-2% MEKP and mixed thoroughly
prior to application. The ratio of catalyst to resin can be varied to adjust the gel time
and cure. For best results workshop temperatures should be maintained above 15º C in
order to ensure that a satisfactory cure is achieved.
Storage
 All Synthepol polyester products should be stored in closed containers away from
any source of ignition and out of direct sunlight at temperatures below 25º C.

All information and products are supplied in good faith, without warranty expressed or implied that they are suitable for any particular purpose, and any statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.We cannot anticipate or control the many different conditions under which our products may be used, and therefore recommend that our clients test and evaluate the products and information to determine theiir suitability for the intended purpose.
Back to resin page
 
Synthepol
A Division Of Chemical Specialties Ltd
116 Princes St. Onehunga. P.O.Box, 29109 Greenwoods Cnr, Auckland, New Zealand.
Phone 0064 9 636 8618. Fax 0064 9 636 8618. E Mail synthepol@chemspec.co.nz